Deutsch English

J-Head (new design) with 0.35 mm nozzle for 3mm filament

J-Head (new design) with 0.35 mm nozzle for 3mm filament
Zoom image

59,95 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 3-4 Days

Stock: 2 Pieces

Product no.: 189
J-Head (new design) with 0.35 mm nozzle for 3mm filament

This kit contains all parts which are needed for the assembly of J-Head hotend MK IV-B as described on reprap.org/wiki/J_Head_Nozzle. This Hotend is intended for 3 mm filament.

ATTENION only intended for PLA. For ABS and other hightemperature materials we recommend this hotend. 

Improved version:

  • with a readymade heating element instead of the simple resistor.
  • grub screw for clamping the heating element.
  • special hole for the thermistor.
  • No firecement is needed for build up, only a piece of kapton tape to fixate the NTC.

 More information about this hotend can be found in our wiki.

The following parts are included in the set:


* 1x 100k thermistor type NTC 104GT-2, Beta = 4267
* 1x heating element
* 1x 4 cm thermostable isolation material
* 2x small ferrules
* 1x carriage
* 1x 0.35 mm nozzle
* 1x carriage for power resistor and thermistor
* 1x PTFE tube
* 1x PEEK heatsink
* 2x grub screw

Please use the following NTC table (for the Marlin Firmware):

   {1*OVERSAMPLENR,700},
   {12*OVERSAMPLENR, 350},
   {13*OVERSAMPLENR, 340},
   {15*OVERSAMPLENR, 330},
   {17*OVERSAMPLENR, 320},
   {20*OVERSAMPLENR, 310},
   {23*OVERSAMPLENR, 300},
   {26*OVERSAMPLENR, 290},
   {30*OVERSAMPLENR, 280},
   {35*OVERSAMPLENR, 270},
   {41*OVERSAMPLENR, 260},
   {48*OVERSAMPLENR, 250},
   {56*OVERSAMPLENR, 240},
   {67*OVERSAMPLENR, 230},
   {78*OVERSAMPLENR, 220},
   {93*OVERSAMPLENR, 210},
   {111*OVERSAMPLENR, 200},
   {133*OVERSAMPLENR, 190},
   {159*OVERSAMPLENR, 180},
   {191*OVERSAMPLENR, 170},
   {230*OVERSAMPLENR, 160},
   {275*OVERSAMPLENR, 150},
   {328*OVERSAMPLENR, 140},
   {388*OVERSAMPLENR, 130},
   {455*OVERSAMPLENR, 120},
   {527*OVERSAMPLENR, 110},
   {601*OVERSAMPLENR, 100},
   {675*OVERSAMPLENR, 90},
   {745*OVERSAMPLENR, 80},
   {808*OVERSAMPLENR, 70},
   {862*OVERSAMPLENR, 60},
   {907*OVERSAMPLENR, 50},
   {941*OVERSAMPLENR, 40},
   {968*OVERSAMPLENR, 30},
   {987*OVERSAMPLENR, 20},
   {1000*OVERSAMPLENR,10},
   {1009*OVERSAMPLENR, 0}

Customers who bought this product also bought the following products:

DICE-9555 V1

DICE-9555 V1

Digital IO expander DICE module (16 IOs) for I²C interface.

12,95 EUR (19 % VAT incl. excl. Shipping costs)
DICE-STK V1

DICE-STK V1

DICE module stepper driver with STEP/DIR interface and up to 1/128 times substepping.

15,95 EUR (19 % VAT incl. excl. Shipping costs)
Drive bolt made out of steel, for 3mm and 1.75mm filament

Drive bolt made out of steel, for 3mm and 1.75mm filament

Professional filament drive bolt with sharp teeth made out of hardened steel.

7,95 EUR (19 % VAT incl. excl. Shipping costs)
Foldback clips, large

Foldback clips, large

2,19 EUR (19 % VAT incl. excl. Shipping costs)
Bearing KFL08, screwable

Bearing KFL08, screwable

Screw-on bearing with 8mm inner diameter

2,49 EUR (19 % VAT incl. excl. Shipping costs)
screwable linear bearing SC8VUU

screwable linear bearing SC8VUU

Screw-on linear bearings for 8mm rods

3,95 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Friday 17 May, 2013.

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

e-mail address:
Password:
Forgot your password?

Reviews

Shopbewertung - 2printbeta.de