Deutsch English

Beta-FanExtender for RAMPS and BAM Shield

Beta-FanExtender for RAMPS and BAM Shield
Zoom image

14,95 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 3-4 Days

Product no.: 357
Beta-FanExtender for RAMPS and BAM Shield

The Beta FanExtender allows the connection of up to four loads that can be controlled by the microcontroller separately.

Beta FanExtender

The board is designed for operation at the servo port on the RAMPS / BAM-Shield, but it can be used on any 0.1in header. The power is supplied externally via an additional connector.

 

FanExtender für BAM-Shield und RAMPS

The expansion module provides the following advanced properties.

Specification:

  • Logic inputs: 3,3V / 5V
  • Number of load channels: 4
  • Supply voltage: 5V - 32V
  • Current per output: 2A (3A in sum)
  • Size: 28 x 11.4 mm
 
Each module is made ​​entirely in our factory and the full function is tested by us before delivery.

(*) When operating at 3.3V, the maximum output current is about 1A per channel.

Usage:

When used with the Marlin firmware, the outputs can be controlled by the following gcodes. XXX can be varied from 0 to 255 to control the speed of the fan.

  • Fan 1: M42 P4 SXXX
  • Fan 2: M42 P5 SXXX
  • Fan 3: M42 P6 SXXX
  • Fan 4: M42 P11 SXXX

 

Customers who bought this product also bought the following products:

ESP8266 WLAN module

ESP8266 WLAN module

A ESP8266 WLAN modul. Easy WLAN / Wifi integration for your projects.

9,95 EUR (19 % VAT incl. excl. Shipping costs)
DICE-STK V1

DICE-STK V1

DICE module stepper driver with STEP/DIR interface and up to 1/128 times substepping.

15,95 EUR (19 % VAT incl. excl. Shipping costs)
DICE-9555 V1

DICE-9555 V1

Digital IO expander DICE module (16 IOs) for I²C interface.

12,95 EUR (19 % VAT incl. excl. Shipping costs)
Fan 30x30 mm 12V

Fan 30x30 mm 12V

This fan for cooling several components, e.g. extruders, electronics and other electrical loads.

4,49 EUR (19 % VAT incl. excl. Shipping costs)
Temperature sensor (NTC) 100kOhm, Type 104GT-2

Temperature sensor (NTC) 100kOhm, Type 104GT-2

NTC  temperature sensor (100kOhm). Type: 104GT-2, beta = 4267, incl. 4cm PTFE tube and ferrules.

4,00 EUR (19 % VAT incl. excl. Shipping costs)
Cable 3x0.2mm˛ with plugs on both sides - 1.2m

Cable 3x0.2mm˛ with plugs on both sides - 1.2m

1,69 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Wednesday 27 August, 2014.

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

e-mail address:
Password:
Forgot your password?

Reviews

Shopbewertung - 2printbeta.de